If you lose the remote control, you can purchase another from an authorized Epson reseller. Make sure the Control Communications or Extron XTP setting in the Extended menu is set to Off if you are using the optional remote control cable set.Make sure the Remote Control Type setting in the Extended menu is set to Normal if you are using the remote control that came with the projector.If you assigned an ID number to the remote control to operate multiple projectors, you may need to check or change the ID setting (feature not available with all projectors).After about 30 seconds, the status light. The status light flashes blue as the projector warms up. Then, check the settings on the projector to make sure that it’s configured to receive the correct. First, make sure that the source of the signal (e.g., your computer or DVD player) is turned on and that it’s properly connected to the projector. Press the power button on the projector or the projector remote control to turn on the projector. There are a few things you can check to make sure that the input signal is working properly. Note: If the Direct Power On setting is turned on, the projector turns on as soon as you plug it in. If available, turn on one of the remote receivers in the projector's menu system, or check if all the remote receivers were turned off. Plug the power cord into an electrical outlet.If you leave the cable connected to the port, the remote control cannot control the projector. Make sure the optional remote control cable set is not attached to the projector's Remote port.Dim the lights or move the projector away from the sun or interfering equipment. I do have the same problem since a week ago. FWIW I have tried different power cables and sockets. Albeit it is a different Epson projector. I dont have much experience dealing with that kind of thing. Strong fluorescent lighting, direct sunlight, or infrared device signals may be interfering with the projector's remote receivers. I saw one post dealing with a different projector that ended up being a short circuit.To unlock the power button of your Epson projector, press and hold it for 10-15 seconds. Release the button to wake the remote control up. So, if your projector is not turning on, maybe its power button is locked, which is why it isn’t responding. Check to see if a button on the remote control is stuck down, causing it to enter sleep mode.In this scenario, the display mode reverts to the 'Duplicate' or 'Extend,' depending on which was selected before you changed to 'Second screen only' or 'Projector only.' Cause. Refer to your user’s manual or the maker’s website for explanations or solutions if the light is on. You close and then reopen the laptop lid. Check the control panel if it has a status or indicator LED light. Make sure the projector is not warming up or shutting down. If your projector isn’t turning on when you push the power button, do the following.Make sure you are operating the remote control within the reception angle and range of the projector.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |